Operation - Panasonic S-80MW1E5 Operating Instructions Manual

Operation

TANK mode
1 Start Operation
Press
(The operation indicator illuminates.)
2 Change the temperature setting
Press
(In TANK mode, only "SET TEMP." can be changed. : 35°C to 65°C)
(The cursor disappears.)
Air-Conditioning mode
[Heating Curve Function] (Only heating mode)
Supply water temperature is adjusted automatically, according to outdoor temperature.
Supply water temperature is able to adjust manually by changing offset value.
1 Start Operation
Press
(The operation indicator illuminates.)
2 Change the setting
Press
Set temperature
z
Press
(When the cursor is not visible.)
Water temperature
Cool : 5°C to 20°C
Heat (With use of Heating Curve) : -5°C to +5°C (offset)
[Normal mode] With no use of Heating Curve Function.
Supply water temperature can be set.
1 Start Operation
Press
(The operation indicator illuminates.)
2 Select the item to set
Press
3 Change the setting
Press
8
OI_00_271368_Eng.indb 8
Water Temperature
 To change the setting
 To stop
(The operation indicator turns off)
Under Heating Curve Control
 To change the setting
 To stop
(The operation indicator turns off)
AIR-CONDITIONING
AIR-CONDITIONING
MODE SET TEMP. SET TEMP.
MODE
COOL
COOL
AIR-CONDITIONING AIR-CONDITIONING
SET TEMP.
MODE SET TEMP.
MODE
HEAT
HEAT
Water Temperature
 To change the setting
 To stop
(The operation indicator turns off)
HOT-WATER-SUPPLY 20:30 (THU)
7
SET TEMP.
TANK
℃
Operation indicator
 Case: With use of Heating Curve Function.
AIR-CONDITIONING 20:30 (THU)
AIR-CONDITIONING 20:30 (THU)
7
7
MODE SET TEMP. SET TEMP.
MODE
HEAT
HEAT
℃
℃
Operation indicator
20:30 (THU)
20:30 (THU)
7
7
℃ ℃
20:30 (THU) 20:30 (THU)
7 7
℃
℃
 Case: With no use of Heating Curve Function.
AIR-CONDITIONING 20:30 (THU)
7
SET TEMP.
MODE
HEAT
℃
Operation indicator
2015-7-2 9:14:25