Advertisement
Elastic-powered Bus : Assembly Instructions
Assemble the front and back wheels
Cut the rubber band
to make a string.
Assemble the body interior
Assemble as shown in the diagram.
Attach the axles
Assemble part S, and attach the area with
the diagonal lines to the inside of the body.
If necessary, cut off the ends.
Tie one end of the band to the band stopper,
and the other end to the middle of the axle.
Follow the fold line,
and glue together
at the back.
Attach the tires to both ends of the axle.
Follow the same process to assemble
the back wheels.
*The axle of the back wheels does not
have an rubber band attached.
Attach part K to part R.
Fit the axles into the grooves of the body.
Check that the wheels spin smoothly.
Advertisement
