Navigating With Asus Go; Selecting The Destination Of A Simple Route - Asus R300 User Manual

. Navigating with Asus GO

You can set up your route in Asus GO in several ways:
• if you need a simple route (a route with only one destination, without any intermediary
waypoints), you can select the destination and start navigating to it right away
• you can plan a multi-point route (available in Advanced mode only)
• you can also plan a route independently of your current GPS position or even without
GPS reception (available in Advanced mode only)

..1 Selecting the destination of a simple route

Asus GO offers you several ways of choosing your destination and waypoints:
• Use the selected location on the map (the Cursor).
• Enter a full address or part of an address, for example a street name without a house
number or the names of two intersecting streets.
• Enter an address with postal code. This way you do not need to select the name of the
settlement and the search for street names might be faster as well.
• Use a coordinate
• Use a saved location:
• a Favourite
• a POI
• the History of previously set destinations and waypoints
Tip
If you are going to use a route later, save it before you start navigating.