Sony BKM-FW50 Service Manual page 9

1. A "Time Table Play Start" command is sent from
FW32 in Master to BSP15.
2. Master sends a "Power ON" command to all Subs.
3. Master acquires the IP address of all Sub BSP15s.
4. Master sends a "Stop Play" command to all Subs.
(At this time, master sends the content address togeth-
er that should be playback with Start Play command.)
5. Master waits for the set time (msec set in delay time).
6. Master and Sub start playback operation.
3. Usage
The playback of contents is synchronized by performing
the setting below on the Web window.
1. Set Master and Sub to BKM-FW50.
2. Set the BSP15 IP address to the ID-Talk host of Sub.
n
The IP address of BSP15 is displayed in IP Address
(Player) of the Network column when you click on
[Information] button on the Web window.
Indicated here
3. Arrange the same contents in Master and Sub.
4. Set the Time Table Play, Auto Play, and Scheduled
Download functions of Sub to OFF so that Sub does
not independently operate during sync playback.
5. Set the Time Table Play function of Master.
6. Set the Sync Play function of Master and Sub to ON.
n
Refer to "2-2-4. Window Configuration" together.
BKM-FW50
2-2-4. Window Configuration
1. Arrangement location of Master/Sub function
Log in to the service mode by entering "http://IP address/
service of BKM-FW50 to be set".
The setting window below is displayed when you press the
[Master/Sub] button.
2-3