Bay Tek Games GRIDIRON BLITZ Service Manual page 33

DEBIT CARD SYSTEM SETUP
The Gridiron Blitz game is pre-wired to accept Card Swipe systems from many manufactures.
Please follow these instructions to make full use of Gridiron Blitz capabilities.
Option #1:
New card swipe systems may come with a standard 9 pin Molex
connector.
Simply unplug this connector and plug into your card swipe reader.
Option #2:
If your card swipe systems does not have a standard 9
pin Molex connector, then you will have to splice wires into
the AACE2801 harness.
Menu Changes
Enter menu, go to "Pay In/Out" Menu
Change "Credits" to 1
Change "Card Reader" to Enabled
Additional:
Baytek sells an optional sticker sheet that will cover up the "Insert
Coin" on many different types of games.
Part # A5DE0047
TRUE
+12 Volts DC
Coin Signal
33
AACE2801
AACE2801
AACE2801
AACE2801
Com (Ground)