Ide Primary Slave - Asus M8 User Manual

IDE Primary Slave

In this field, indicate the size of a disk drive or the device type, such as a CD-ROM drive. The arrow
head icon indicates that this field contains a sub-menu. The sub-menu is used to configure the IDE
Hard Disk installed in the system.
To configure a hard disk drive, move the cursor to highlight the IDE Primary Slave field, and press
[Enter]. The following sub-menu screen will appear. The fields and options on this sub-menu are
the same as the previous menu described earlier. Set the type as CD-ROM in this field to support an
inserted CD-ROM or DVD drive module.
NOTE: After using the legend keys to make your selections in this sub-menu, press the [Esc] key to
return to the Main menu.
74
PhoenixBIOS Setup Utility
Main Advanced Security
IDE Primary Slave
Type: [Auto]
Multi-Sector Transfers: [Disabled]
LBA Mode Control: [Disabled]
32 Bit I/O: [Disabled]
Transfer Mode: [Fast PIO 4]
Ultra DMA Mode: [Mode 2]
Power Boot Exit
[CD-ROM]
Item Specific Help
Auto = autotypes
hard-disk drive
installed here.
None = force setting no
IDE device.
CD-ROM = a CD-ROM
drive is installed here.
User = you enter
parameters of hard-disk
drive installed at this
connection.