Table of Contents
Advertisement
16 Inspection/servicing
–
The product is designed to be low maintenance.
–
Make sure that the product is switched off and clean it
with a damp cloth and a non-abrasive cleaning solu-
tion.
–
If deposits or contaminants build up on the sensor, we
recommend that you set appropriate maintenance in-
tervals.
–
Make sure that the product has been properly shut
down and clean the sensor with a non-abrasive clean-
ing solution and soft brush or sponge.
–
If limescale has built up on the sensor, descale the
product.
● Carry out inspection and servicing for products in the po-
tentially explosive area to DIN EN 60079-17.
17 Disposal
1. Pay attention to adhered residual material and gas diffu-
sion from penetrated media.
2. Dispose of all parts in accordance with the disposal regu-
lations/environmental protection laws.
www.gemu-group.com
18 Returns
Legal regulations for the protection of the environment and
personnel require that the completed and signed return deliv-
ery note is included with the dispatch documents. Returned
goods can be processed only when this note is completed. If
no return delivery note is included with the product, GEMÜ
cannot process credits or repair work but will dispose of the
goods at the operator's expense.
1. Clean the product.
2. Request a return delivery note from GEMÜ.
3. Complete the return delivery note.
4. Send the product with a completed return delivery note to
GEMÜ.
23 / 28
18 Returns
GEMÜ 3240
Advertisement
Table of Contents
