Powering On Your Eee Pc - Asus Eee PC 1215B User Manual

Powering on your Eee PC

These are only quick instructions for using your Eee PC.
1. Install the battery pack
3. Turn ON the Eee PC
• When you open the display panel, do not force it down to the table
or else the hinges may break! Never lift the Eee PC by the display
panel!
• Only use battery packs and power adapters supplied with this
Eee PC or specifically approved by the manufacturer or retailer for
use with this model or else damage may occur to the Eee PC. The
input voltage range between the wall outlet and this adapter is AC
100V~240V, and the output voltage of this adapter is +19Vdc, 2.1A.
• Never attempt to remove the battery pack while the Eee PC is
turned ON, as this may result in the loss of working data.
Remember to fully charge the battery before first use and whenever
it is depleted to prolong battery life.
2-2
2. Connect the AC power
adapter
2
1
Damage may occur if you use
a different adapter to power
the Eee PC. You may damage
both your battery pack(s) and
the Eee PC with a faulty AC-
DC adapter.
Chapter 2: Getting Started
3
1 1 0
V -2 2
0 V