Front Panel Of The Sdm-Ao4A; Description Of Terminal Block Connections - Campbell SDM-AO4A Product Manual

FIGURE 4-1. Front Panel of the SDM-AO4A
TABLE 4-1. Description of Terminal Block Connections
SDM-AO4A to Data Logger Connections
12V - 12 volt supply
G - ground
G - ground
C1 C1 (SDM-C1 on CR3000)
C2 C2 (SDM-C2 on CR3000)
C3 C3 (SDM-C3 on CR3000)
SDM-AO4A to Analogue Output Connections
- analogue output #1
1
⏚
- ground
- analogue output #2
2
⏚
- ground
- analogue output #3
3
⏚
- ground
4 - analogue output #4
⏚
- ground
1 The CR3000 has a dedicated SDM port with three terminals.
SDM-AO4A Four-Channel Analogue Output
1
1
1
3