Connectors - Asus T3-P5G965 Manual

4.4

Connectors

This section describes and illustrates the connectors on the motherboard.
1. CPU fan connector (4-pin CPU_FAN)
The fan connector supports the proprietary CPU fan. Connect the fan
cable to the fan connector on the motherboard, making sure that the
black wire of each cable matches the ground pin of the connector.
CPU Fan Connector
Do not forget to connect the fan cable to the fan connector. Insufficient
air flow within the system may damage the motherboard components.
These are not jumpers! DO NOT place jumper caps on the fan
connectors!
2. ATX power connectors (24-pin EATXPWR, 4-pin ATX12V)
These connectors are for the 24-pin and 4-pin power plugs from the
power supply unit. The plugs from the power supply unit are designed
to fit these connectors in only one orientation. Find the proper
orientation and push down firmly until the connectors completely fit.
Do not forget to connect the 4-pin ATX12V power plug to the ATX12V
connector on the motherboard; otherwise, the system will not boot up.
R
ATX Power Connector
ASUS T3-P5G965
R
CPU_FAN
GND
CPU FAN PWR
CPU FAN PWM
CPU FAN IN
EATXPWR ATX12V
4-5