4.3
Connectors
4.3.1
Rear panel connectors
Refer to section "1.3 Rear panel" for a description of the rear panel I/O ports.
4.3.2
Internal connectors
1.
Floppy disk drive connector (34-1 pin FLOPPY)
This connector is for the provided floppy disk drive (FDD) signal cable. Insert
one end of the cable to this connector, then connect the other end to the
signal connector at the back of the floppy disk drive.
Pin 5 on the connector is removed to prevent incorrect cable connection when
using an FDD cable with a covered Pin 5.
Floppy Disk Drive Connector
P5B-VM
ASUS Pundit P3-PH5
FLOPPY
PIN 1
NOTE: Orient the red markings on
the floppy ribbon cable to PIN 1.
-