Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Summary of Contents for iBell OS23-46
- Page 1 ORBITAL SANDER OS23-46...
-
Page 3: Table Of Contents
TABLE OF CONTENTS 1. GENERAL POWER TOOL SAFETY WARNINGS __________ 2. DRYWALL SANDER SAFETY WARNINGS________________ 3. PRODUCT OVERVIEW _________________________________ 4. INTENDED USE ________________________________________ 5. PRODUCT SPECIFICATIONS ___________________________ 6. PRODUCT FUNCTIONS AND ASSEMBLY________________ 7. GENERAL OPERATION ________________________________ 8. TROUBLESHOOTING __________________________________ IBL OS23-46... -
Page 4: General Power Tool Safety Warnings
Keep it away from heat, oil, sharp edges or moving parts. When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock. IBL OS23-46... - Page 5 When servicing a power tool, use only identical replacement parts. Follow instructions in the maintenance section of this manual. Use of unauthorized parts or failure to follow maintenance instructions may create a risk of shock or injury. IBL OS23-46...
- Page 6 Injuries and damage to property due to broken cutting attachments or the sudden impact of hidden objects during use. Danger of injury and property damage caused by other objects or due to natural reactions or calamities. IBL OS23-46...
- Page 7 Incorrectly sized accessories cannot be adequately guarded or controlled. Keep the work area well ventilated. Ensure that the workplace lighting is adequate, and/or provide extra lighting for the immediate work area. IBL OS23-46...
- Page 8 Always check the tool for damaged parts. Regularly clean the power tool’s air vents. The motor’s fan will draw the dust inside the housing and excessive accumulation of powdered metal may cause electrical hazards. IBL OS23-46...
-
Page 9: Product Overview
PRODUCT OVERVIEW 1. ON/OFF Trigger Switch 4. Auxiliary Handle 2. Switch Lock ON Button 5. Guard-Sanding base 3. Variable Speed Control 6. Dust Extraction Bag IBL OS23-46... -
Page 10: Intended Use
Rated Input Power : 300W Rated no load speed : 4000-12000 rpm Wheel/Pad diameter : 125 mm Sanding disc diameter : 125 mm Dust port diameter : 32 mm Protection class : Class II : 1.8 Kg Weight IBL OS23-46... -
Page 11: Product Functions And Assembly
AUXILIARY HANDLE An auxiliary handle (4) is supplied with the product that can be fixed and swivelled 360° according to the operators convenience. This handle should be used all the time to maintain complete control of the tool. IBL OS23-46... - Page 12 Push the end of dust hose onto the dust port at the back of the tool. To remove the dust bag and hose, simply pull the end of the hose off the tools dust port. IBL OS23-46...
-
Page 13: General Operation
Empty dust bag frequently so that the collection system works NOTE: properly. Also to help prevent possible hazards. Do not use the sander without sanding disc. Always continue sanding with each grit until the surface is uniform. IBL OS23-46... - Page 14 If replaced, both carbon brushes should be replaced at the same time. This product does not contain any parts that can be NOTE: repaired by the consumer. Contact an authorised service centre or a similarly qualified person to have it checked and repaired. IBL OS23-46...
-
Page 15: Troubleshooting
4. Machine (Use less pressure) 4.2 Have the odd overheating 4.2 Odd substances substances removed. inside the motor. All further inspection and repair work must be WARNING! performed by an authorised service centre or a qualified technician! IBL OS23-46... - Page 16 Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or local store for recycling advice. Do not dispose this product by normal household waste, but take it to a collection point and recycling of electrical and electronic equipment.
Need help?
Do you have a question about the OS23-46 and is the answer not in the manual?
Questions and answers