Brookstone airphones BKH600 User Manual page 17

3. Repeat step 2 with the other earbud.
4. Take both earbuds out of the case, then put them back
into the case for 10 seconds.
5. Remove both earbuds from the Charging Case and let
them link with each other (this will occur automatically).
6. Once linked, they will automatically go into pairing
mode. The LED of the Right earbud will quickly flash
RED while the LED of the left earbud will slowly flash
WHITE.
7. Open your device' s Bluetooth list and delete Brookstone
BKH600 from your paired devices list.
8. Turn off the Bluetooth feature of your device and then
turn it back on and search for Brookstone BKH600
to connect.
Charging Case
Multifunctional
Touchpad
16