Table of Contents
Advertisement
Mega Bar 50RGB RC
These fixtures are capable of being linked together via the IEC input and output sockets.
The maximum number of fixtures that can be connected in this manner is 44 fixtures. Once
this value is reached, a new power outlet will be necessary to accommodate additional fix-
tures.
All fixtures connected in this manner must be of the same make and model type. DO NOT mix
fixtures.
Mega Bar 50RGB RC
First unplug the power cord from the socket, then disconnect the power cord from the unit. Locate
the fuse holder inside the power socket, and use a screwdriver to gently pry out the fuse holder. Re-
move the bad fuse and replace with a new one. Please note that the fuse holder has a built-in socket
for a spare fuse, so make sure to replace the correct fuse.
Mega Bar 50RGB RC
Due to fog residue, smoke, and dust, cleaning the internal and external optical lenses must be carried
out periodically to optimize light output.
•
Use normal glass cleaner and a soft cloth to wipe down the outside casing.
•
Clean the external optics with glass cleaner and a soft cloth every 20 days.
•
Always be sure to dry all parts completely before plugging the unit back in.
Cleaning frequency depends on the environment in which the fixture operates (i.e. smoke, fog resi-
due, dust, dew).
Mega Bar 50RGB RC
Listed below are common problems the user may encounter, with solutions.
Unit not responding to DMX:
Check that the DMX cables are connected and wired properly (pin 3 is "hot"; on some other DMX
devices pin 2 may be 'hot'). Also, check that all cables are connected to the right connectors, as the
way that the inputs and outputs are connected can affect operation.
Unit does not respond to sound:
Quiet or high pitched sounds will not activate the unit.
If problems are not resolved, contact ADJ for service.
1-800-322-6337.
ADJ Products, LLC - www.adj.com - Mega Bar 50RGB RC User Manual Page 20
Power Cord Daisy Chain
Fuse Replacement
Trouble Shooting
Cleaning
Advertisement
Table of Contents
