■
Remove the Cooling Fans
1.
Push the tabs on the left and right sides of the fan finger guard and pull up to remove the
fan finger guard from the drive.
A - Fan finger guard
2.
Pull the cooling fans straight up from the drive. Remove the protective tubes on the
power supply connectors and disconnect the connectors to remove the fans from the
drive.
A - Cooling fan
■
Install the Cooling Fans
Reverse the removal procedure to install the cooling fans.
YASKAWA TOEP C730600 0FA Fan Replacement Procedure
Figure 5.27 Remove the Fan Finger Guard
Figure 5.28 Remove the Cooling Fans
5 Replace Cooling Fans and Circulation Fans
B - Protective tube
21