Remove A Cooling Fan; Install A Cooling Fan - YASKAWA AC Drive Manual

5 Replace Cooling Fans and Circulation Fans
■

Remove a Cooling Fan

1.
Push the tab on the back side of the fan finger guard and pull up to remove the fan finger
guard from the drive.
A - Fan finger guard
2.
Pull the cooling fan straight up from the drive. Remove the protective tube on the power
supply connector and disconnect the connector to remove the fan from the drive.
A - Cooling fan
■

Install a Cooling Fan

Reverse the removal procedure to install a cooling fan.
14
Figure 5.13 Remove the Fan Finger Guard
Figure 5.14 Remove the Cooling Fans
B - Protective tube
YASKAWA TOEP C730600 0FA Fan Replacement Procedure