Asko W6231 Use And Care Manual page 12

5 5
SELECT A PROGRAM
Select the program that you wish to use
with the program selector knob. You can
select between the following programs:
1 Heavy wash (with pre-wash)
2 Normal wash
3 Light wash
4 Synthetic wash
5 Quick wash
6 Super quick wash
7 Wool wash
8 Hand wash
9 Rinse program
10 Spin
11 Drain
The table on the following page contains more
information about the programs.
6 6
SELECTING SETTINGS AND OPTIONS
You can obtain a washing program to
suit your particular wash by setting the
temperature knob and pressing the appropriate
option buttons.
Temperature
Set the desired temperature with the tempera-
ture knob. If you select C, the wash temperatu-
re will be the same as that of the incoming wa-
ter.
For certain programs, the maximum tempe-
rature is always 40°C; see the table below.
12
Spin
Set the spin knob to the desired setting.
A spin speed of 800 revolutions/minute or
lower will always involve a short final spin. Spin
speed settings above 800 revolutions/minute
will always involve a long final spin.
For certain programs, the maximum spin
speed is always 800 revolutions/minute; see the
table below.
By pressing the
be executed without a spin.
By pressing the
be executed without a spin and will be comple-
ted without draining. The fabrics will thus re-
main floating in the water and will not crease.
On completion of the program, disconnect
and select either the Spin or Drain program to
drain the rinsing water from the machine.
Super rinse
Press the button to select the Super rinse
option.
Super rinse adds extra rinses to the washing
programs; see the table.
Delayed start
By pressing the
start 5 hours after you start the washing pro-
gram.
NOTE
Do not forget also to press the
you wish to start with a delayed start.
button, the program will
button, the program will
button, the machine will
button if