Bmi Mode - Heinner HDS-150BKSL Instruction Manual

www.heinner.com
Place the scale on flat floor
After digits stabilize, more additional loadings can be conducted. Ensure each add-on loading has
to exceed 2kg to get a new reading.
Example: if you want to get a weighing value of your baby, you can weigh yourself first and then
hold your baby together, without stepping off the scale. Then you will get the total weight
reading. Subtracting the previous reading of yourself from the new reading, you will get the
difference as your baby's weighing value.

BMI MODE

Parameter can be set in the following range:
User code
1~8
2. BMI user mode (save data automatically)
To set user parameters: press SET to set user parameter, setting in order of user code (1-8),
gender, height. Press SET again to confirm the input. When finish setting, press the scale gently,
the parameters will be saved and the scale goes into weighing mode. Step on the scale, when
digit stabilizes, it shows the weight and BMI and the circle bar will show the BMI level.
Step on
weighing
platform
Shows the weight and flashes
three times
Auto off
gender height
male/female 100~250 cm
3'03.0"~8'02.5"
150kg, 2 x 1,5V AAA
Save data
Shows user information
Not saving data
Press button to
choose user code, press
(SET) button to confirm
Shows BMI
15