Asko D5223XXLIS Operating Instructions Manual page 28

Installation and connection information
dIShwAShER CAvITY mEASUREmENTS
2-4"
50-105 mm
DISHWASHER MEASUREMENTS
With fill strips**
With toe kick
(see Steep 7)
Without toe kick
* With fill strips and without plastic feet.
** ASKO XLFI dishwashers can be installed either with or without accessory fill strips depending on the type
of installation. If the dishwasher cutout has been cut to European widths of 23-5/8" (600 mm), the unit won't
require fill strips. If the dishwasher cutout is a standard 24" wide, we have fill strips that make the unit 24"
(610 mm) wide.
*** Without plastic feet.
8
Cable hole
1-3/4"
44 mm
W = 24"
W = 610 mm
*
H minimum H maximum
**
-1/", 870 mm ", 890 mm
-1/", 870 mm -1/8", 90 mm
Customer Care Center
H - see table below
Make sure the edges of the cable
hole are even to avoid damage to
the drain and supply hoses and
the electric cable.
34-1/4 to 36-1/8"
870-920mm
Without fill strips
H minimum
-/", 80 mm
-/", 80 mm
1-800-898-1879
www.askousa.com
H maximum
***
-/8", 880 mm
-/", 910 mm