Safety Notes; Terms Used - ETC transtechnik E-Gate max User Manual

E-Gate max

Safety notes

Protective insulation and other protective measures in the E-Gate device ensure that you
cannot come into contact with any harmful electric currents.
Please observe the following in spite of this:

Never switch on equipment that is obviously damaged. Send the equipment to
transtechnik for repairs.

Equipment is only to be used for its intended purpose.

Avoid extreme mechanical loads (for example, throwing).

Do not allow the equipment to become wet.

If there is any reason to suspect a fault, unplug the equipment from the main
power supply immediately. Ensure that it cannot be started up again and send
the equipment to transtechnik for repairs.

Ensure that it is disconnected from the main power supply before opening.

Repair work may only be performed by an authorized dealer or transtechnik.

Terms used

Universe A universe is the Ethernet equivalent of a DMX line (512 DMX values).
E-Gatekeeper Operating software for central network-based management of all E-Gates of
type plus, pro and max
Safety notes, terms
1