Menus M01 Through M11; Menu M01 (Communication Address); Menu M02 (Ip Address) - ETC transtechnik E-Gate max User Manual

E-Gate max

Menus M01 through M11

Menu M01 (Communication address)

Set the communication address to be able to communicate
with the E-Gatekeeper software
Press [Edit]
and turn the encoder dial
Press [Edit] again and turn the
encoder dial
If the communication address is specified, it must be unique.

Menu M02 (IP address)

Setting the IP address
Press [Edit] repeatedly and turn
the encoder dial
The IP address must be unique.
Exception: When the end address is 000, only reception is possible via Ethernet,
communication with the E-Gatekeeper not possible,
sending DMX  Ethernet is not possible.
Select the communication address:
Display: Meaning:
off
No communication address or no
communication
1
Communication address 1 through 99
...
99
Select the device:
Display: Meaning:
A Main device
B Backup device
Select the IP address:
Display:
192.009.200.000
Local operation
COM
address:
IP address
192.009.200.000
Meaning:
IP address
M01
1 A
M02
11