Settings - Asko D4 Use And Care Manual

SETTINGS

REPROGRAMMING
Some of the machine functions can be reprogrammed. Access to reprogramming of the machine is
gained via the ordinary control buttons as explained below. Any alteration made will remain intact
until the next time you alter the functions.
Even if the machine is turned off using the main power switch, or if power is cut off in any other way,
the selections made prior to loss of power will remain intact.
The selection is shown for two seconds by the indicator lamps, after which the machine returns to
the main programme.
Empty lamp symbol implies lamp off.
Filled lamp symbol implies lighted lamp.
Filled lamp symbol crossed out and underlined implies flashing lamp
CHILD-SAFE STARTING
Inadvertent starting of the machine by a child can be counteracted by programming the machine to
start only if the start button is pressed for three seconds to enable it to start.
1. PRESS LIGHT WASH FIVE TIMES* (WITHIN 15 SECONDS)
2. PRESS QUICK WASH ONCE TO OBTAIN CHILD-SAFE START
OR RESET:
2. PRESS LIGHT WASH ONCE AND YOU WILL GET NORMAL FUNCTION
* The latest selected setting will be shown.
COOL DOWN
If you wash-up delicious items as fine china or thin glasses, big temperature changes mean risk for
cracking, if the machine is connected to cold water, you can make the machine cool down the dishes,
before cold water enters the machine for the next step.
E
1. PRESS FIVE TIMES ON THE ECO/BIO FUNCTION* (WITHIN 15 SECONDS)
2. PRESS THE QUICK WASH ONCE TO GET COOL DOWN
OR RESET:
2. PRESS LIGHT WASH ONCE AND YOU WILL GET NORMAL FUNCTION
* The latest selected setting will be shown.
24
Display Lamps
3
-
C
-