Installation; Suggestions On Positioning The Dishwasher; Built-In; Freestanding - Asko D3530 Use And Care Manual

Installation

Suggestions on positioning the
dishwasher
The dishwasher can be built in, fully free-
standing or semi-freestanding.
CAUTION!
Connection to electricity, water and drain-
age must be carried out by a suitably
qualified person.
A. Built-in
The dishwasher can be built in under a
work surface with a working height of 820-
870 mm. The width measurement must be
at least 600 mm. For more measurements
see picture.
B. Freestanding
A freestanding dishwasher must be fitted
with anti-tilt. This comprises two fastening
irons which are screwed into place as il-
lustrated.
The dishwasher is then pushed in so that
the fastening irons grip onto the rear feet.
The dishwasher cannot now tilt in the
event a load is placed on the open door. If
the dishwasher is to be fully freestanding,
both side panels and the work top should
be fitted. These accessories can be pur-
chased where you purchased the dish-
washer.
C. Semi-freestanding
If the dishwasher is positioned so that ei-
ther side is visible, a side panel can be fit-
ted.
These accessories can be purchased
where you purchased the dishwasher.
Built-in installation
820-870
Freestanding installation
CAUTION!
A fully freestanding dishwasher must be
fitted with anti-tilt.
820-
870
100-
150
31