Advertisement
OPERATION ______________________________
Note
The comb attachments fit both cutting
7
heads.
3
Push the comb attachment carefully
and firmly onto the rounded rear
half of the cutting head from above
and let it click into place.
4
Press the
button to switch on the
C
appliance.
5
Begin use.
6
Press the
button to switch off the
C
appliance after use.
7
After use, remove the comb attach-
ment
to
1
6
locking tab at the back and remov-
ing the comb attachment.
2 4 ENGLISH
by pressing the
Thinning out hair ...
... using the comb attachment
ning to a length of 2 mm).
1
If necessary, remove the attachment
by pressing in both side catches
and lifting off.
2
Insert attachment
38 mm) or
9
fully at the top and press down until
it clicks into place.
3
Push the comb attachment
fully and firmly onto the rounded
rear half of the cutting head from
above and let it click into place.
4
Press the
button to switch on the
C
appliance.
5
Begin use.
6
Press the
button to switch off the
C
appliance after use.
7
After use, remove the comb attach-
ment
by pressing the locking
7
tab at the back and removing the
attachment.
(thin-
7
(width
A
(width 30 mm) care-
care-
7
B
Advertisement
