Ashly MX-206 Technical Notes & Specifications page 2

Specifications MX-206:
(unless otherwise stated, specification conditions are 150Ω source, all levels nominal, outputs into 2.7KΩ or greater)
Total Harmonic Distortion:
< 0.05 % @ +20 dBu, 20 Hz-20 KHz; input switch at -40dB
IMD (SMPTE IM distortion):
< 0.02 % @ +20 dBu, input switch at -40dB
HUM & NOISE: (20 Hz-20 KHz noise bandwidth, input switch at -60dB)
< -127 dBu equivalent input hum and noise
< -100 dBu residual output noise TRS all level controls minimum
< -90 dBu residual output noise XLR all level controls minimum
< -84 dBu Master Out, Master Level at nominal, all Ch. Level controls at min
< -80 dBu Master Out; Master Level and one Ch. Level at nominal
FREQUENCY RESPONSE:
20 Hz-20 KHz, +0/-0.5 dB
MAXIMUM VOLTAGE GAIN:
84 ± 2 dB: MIC INPUT to MASTER OUTPUT
34 ± 2 dB: AUX INPUT to MASTER OUTPUT
CROSSTALK:
< -60 dB @ 20KHz, between any inputs or outputs
VU METER:
Two 6-segment LED meters, 0 VU = +4 dBu
PEAK INDICATORS:
Peak CLIP indicator on each input channel and on outputs, illuminating 3 dB below clipping
PHANTOM POWER:
+48 VDC applied to all MIC INPUTS, switchable on back panel
80mA maximum total current draw
14mA maximum single current draw
Gradual power-up and down to eliminate "pops."
POWER REQUIREMENTS:
100 - 240VAC, 50-60 Hz, 30 watts.
DIMENSIONS:
19"L x 1.75"H x 8.0"D
SHIPPING WEIGHT:
13 lbs. maximum
MX-206 Rear Panel
Applications:
Live Sound Reinforcement, Conference Rooms, Lecture Halls, Houses of Worship, Broadcast, Recording, and
Film/Video Production.
Ashly manufactures a complete and comprehensive line of Analog and Digital Signal Processors, Power
Amplifiers, Mixers, and Amplifier Input Options. Please call, write or visit our web site for information on
any of these Ashly Products.
Ashly Audio Inc., 847 Holt Road, Webster, NY 14580-9103
Toll Free (800) 828-6308, Tel: (585) 872-0010, Fax: (585) 872-0739
www.ashly.com, e-mail: info@ashly.com