Operating Manual -MX-206 Stereo Microphone Mixer Important Safety Instructions Consignes de sécurité à lire attentivement The lightning flash with arrowhead symbol, within an equilateral triangle, Le symbole de la flèche dans un triangle équilateral symbolisant la foudre is intended to alert the user to the presence of uninsulated "dangerous est prévu pour sensibiliser l’utilisateur à...
1. INTRODUCTION 2. UNPACKING Congratulations on your purchase of an Ashly MX- As a part of our system of quality control, every Ashly 206 stereo microphone mixer. In one single-space rack-mount product is carefully inspected before leaving the factory to package we have combined the features, reliability, and sonic ensure flawless appearance.
The Left and Right output levels are independently controlled by these two dials. They respectively determine the The MX-206 mixer is fitted with five types of audio signal at the 1/4" jack Main outputs. connectors: 3-pin XLR type male (mono output), 3-pin XLR type female (mic inputs), tip-ring-sleeve (TRS) phone jacks, 4.7 Mono Output...
Page 5
Operating Manual - MX-206 Stereo Microphone Mixer Two-conductor (twisted pair) shielded cable is 5.3 Stereo Line In - Stereo Line Out best for all XLR type connections. Belden No. 8412, or its The stereo line inputs on RCA and 3.5mm connec- equivalent, is an excellent cable due to its heavy construction.
6. TYPICAL APPLICATIONS: 6.1 Small Sound Reinforcement System: In the setup shown here, the MX-206 is used to mix typical sound sources that might be found in a small club, meeting room, school theater or similar environment. Six input channels are used for microphones for vocal or instrumental pickup.
EXCLUSIONS: This warranty does not apply in the event of misuse, neglect, or as a result of unauthorized alterations or repairs made to the product . This warranty is void if the serial number is altered, defaced, or removed . ASHLY AUDIO, INC . reserves the right to make changes in design, or make additions to, or improvements upon, this product without any obligation to install the same on products previously manufactured .
Need help?
Do you have a question about the MX-206 and is the answer not in the manual?
Questions and answers