ACU-RITE MILL-PWR G2 Software Update page 4

Console ID # 745604-NN
G2 consoles (ID#745604-NN)

These consoles cannot be upgraded to R5 and will continue to receive service
packs under the R4 release. Please do not attempt to install release 5 (R5) onto
these consoles.

System drive restructuring on this original design consoles will cause the console
to become un-operational and require in house service to correct the issue. Do
not restructure the drive on these consoles.

Not all software enhancements will be included in future R4 releases . We
will continue to support console ID# 745604-NN with service packs through the
R4 released software that will mainly include minor enhancements or fixes.

USB Recovery Drive Kit 1201909-01 includes a compatible USB Recovery Drive
ID# 680480-03 for original G2 consoles (ID#745604-NN) and should be ordered
when replacing a recovery drive for these consoles. This drive does not include
the restructuring option, so the unit cannot be restructured accidentally.
G2 consoles (ID#1113777-NN)

R5 cannot be installed unless you have R4SP4 installed first . If you have previous
version of software such as R1, R2, or R3 SPx (release 1, release 2, or release 3 with
any service pack) download and install R4 SP4 prior to updating to R5.

Due to the enhanced features of release 5, it has become necessary to restructure the
console's hard drive. USB Recovery Drive ID# 680480-04 is now included in Recovery
Drive Kit ID# 1127022-01 which supports all G2 consoles and all software versions to
date or planned for the near future. This new recovery drive includes an option for
resizing the control's hard drive partitions. This must only be performed on current
consoles (ID#1113777-NN) that are running software release 4 service pack 4 (R4 SP4).
Please insure the console is updated to this release prior to restructuring the drive and
installing release 5 (R5). Hard drive restructuring is required on these consoles prior to
the upgrade to release 5 (R5).
Console ID # 1113777-NN