Subscribe to Our Youtube Channel
Related Manuals for Milnor E-P OneTouch
Summary of Contents for Milnor E-P OneTouch
- Page 1 Manual Number: MMCOUO01 Edition (ECN): 2020182 Operator Guide E-P OneTouch ® Controls PELLERIN MILNOR CORPORATION Post Office Box 400, Kenner, Louisiana 70063–0400, U.S.A.
-
Page 3: Table Of Contents
Contents 1 Description of Controls .........................2 1.1 Controls on E-P OneTouch ® Model Washer-extractors ............2 1.1.1 Control Functions During Normal Operation............2 2 Normal Operation..........................4 2.1 E-P OneTouch ® Operation ....................4 2.1.1 Instructions for Normal Operation ................4 2.1.1.1 Load the Machine ..................4 2.1.1.2 Start a Formula .....................4... -
Page 4: Description Of Controls
Control Functions During Normal Operation BNCOUF01.R01 0000189507 A.5 A.7 A.6 1/2/20 1:25 PM Released Formula Selection Buttons — The E-P OneTouch controller provides four pre-programmed formulas that vary according to machine configuration. Start the desired formula by pressing the corresponding Formula Selection button (... - Page 5 The Door Unlock button is disabled for 75 seconds after a formula ends, whether the formula ended normally, was ended early by the operator, or ended because of an error. Pellerin Milnor Corporation...
-
Page 6: Normal Operation
2 Normal Operation BNCOUO01 / 2018253 BNCOUO01 0000189435 1/2/20 1:25 PM Released E-P OneTouch ® Operation BNCOUO01.C01 0000189471 A.5 A.4 1/2/20 1:25 PM Released 2.1.1 Instructions for Normal Operation BNCOUO01.C02 0000189470 A.5 A.4 1/2/20 1:25 PM Released 2.1.1.1 Load the Machine BNCOUO01.T01 0000189469 A.5 A.4 1/2/20 1:25 PM Released... -
Page 7: How To End A Formula Early
Do not try to load the machine to its maximum weight capacity with bulky fabrics. Use the size of the machine, the type of the goods, the amount of soil, and the wash quality when you load the machine. Pellerin Milnor Corporation... -
Page 8: Troubleshooting
After 10 minutes, the lights remain off. To start the machine again: 1. press the Terminate button ( ) to recover from this error, 2. ensure that the door is securely closed, 3. then start the formula again. Pellerin Milnor Corporation... - Page 9 3. Finally, hold the Door Unlock button ( ) and unlatch the door. If the error happens again after you close the door, contact an authorized maintenance person. After correcting any error with the inverter itself, start the formula again. Pellerin Milnor Corporation...
Need help?
Do you have a question about the E-P OneTouch and is the answer not in the manual?
Questions and answers