Download Print this page

W+W 78541 Mounting Instruction page 3

Ladder type 7b

Advertisement

Available languages

Available languages

Mounting instruction Ladder type 7B
Art.no.: 78541-78546
In general
The mounting instruction contains important tips
for the appropriate and safe mounting of the ladder.
Intended use
Pit ladder for permanent placement in a pit.
Maximum pit depth 2,5m.
Safety advice
All safety instructions and all safety measures for lift mounting have
to be considered while mounting.
Assembly operations at lift systems have to be accomplished only by
qualified persons according to TRBS 1203.
If ladders are mounted in lift shafts, the ladder and its attachments
must not extend into the moving parts of the lift.
For professional use of the ladder see the instructions
affixed to every ladder.
If there are no other equal possibilities of holding on to, the ladder
must jut out at least min. 1,10m beyond the exit, according to
EN 81-20:2014
The distance between the edge of the landing entrance and the ladder
in its stored position shall not be more than 800 mm
The distance between the edge of the landing entrance and the middle
of the rung shall be at most 600 mm for an easy accessibility.
Scope of delivery
1x
Ladder with lever mechanics (max. mounting height on the wall: about 70mm)
1x
Mounting wood
1x
Accessory bag for wall fastening
1x
Mounting instruction
1x
Monitoring switch with accessories
03/2015 Version 1
560904

Advertisement

loading

This manual is also suitable for:

78546