Advertisement
Quick Links
Advertisement
Related Manuals for Audipack FSMO HBV Series
Summary of Contents for Audipack FSMO HBV Series
- Page 1 Flat panel housings Installation manual FSMO-XXHBV / FSMO-XXHBVP © Audipack...
- Page 2 The centre bolt of the wall mount is equal to the centre of the flat panel. Install level and use correct mounting materials. Always use the Audipack mount for wall installation because with this mount it is not possible to unlock the mounting bolts to the wall in completed installation.
- Page 3 (separately packed in a plastic bag) Install the housing by inserting the 4 cams in the keyholes. Ones installed insert the M6 bolt to secure the housing and prevent it from lifting out. 2015-07 © Audipack...
- Page 4 Before installing the monitor and bracket assembly, retract the back plate and secure it with two M6 bolts on both sides. Back plate The monitor is adjustable in height. Retract back plate when the monitor is installed. 2015-07 © Audipack...
- Page 5 Advise: Set the ventilation thermostat at aprox. 25 degrees. Set the heating thermostat at aprox. 15 degrees. Change the settings to your application. Air out Air out Air in Air in Heating unit Temperature Ventilation unit controller 2015-07 © Audipack...
- Page 6 There are holes provided to secure the cables with tyraps. The HEPA filter (part no. 230060) needs to be checked periodically. Replacing the filter is simply done by removing the filter cover. HEPA-filter (part no. 230060) 2015-07 © Audipack...
- Page 7 Before installing the front cover don’t forget to connect the grounding wire. To cover the housing simply lift the front cover over the top cams of the housing and hinge it vertical. Be sure the locks are “out”. Press the locks “in” to secure the front. 2015-07 © Audipack...
- Page 9 Audipack reserves the right to make changes in specifications and other information contained in this document without prior written notice. The information provided herein is subject to change without notice. In no event shall Audipack be liable for any incidental, special, indirect, or consequential damages whatsoever, including but not limited to lost profits, arising out of or related to this manual or the information contained herein, even if Audipack has been advised of, known, or should have known, the possibility of such damages.