Arturia CS-80V User Manual page 49

The «EDIT» button is to edit the sound (or single) assigned to the polyphonic voice. This
updates the graphical interface controls so that they display the single settings.
The Multi mode possibilities are extremely varied. It is possible to separate the keyboard
into different zones, each zone with a different sound, to widen an accompaniment sound
with the stereo image or fine tuning for a large chorused effect. Another example would
be to use the ring modulator only on one voice in order to limit intermodulation effects,
and so forth.
In order to listen to a particular sound, just close the Multi hatch. The sound used is thus
the sound being currently edited. The closing of the hatch corresponds to solo mode with
a voice control using the «CsAssign» mode on the entire of the keyboard.
Certain settings are the same for all voices. This is the case for settings that control the
effects (chorus, delay, ring modulator), pedals, sustain and portamento. It is also the
case for the settings controlling the sub-oscillator, the pressure on the keys that affect
the sub-oscillator, the key follows and finally the general brilliance and resonance of the
synthesizer.
General settings
The other settings affect each sound independently of the others, setting the different
parameters of a single voice.
Polyphonic Settings
49
ARTURIA – CS-80V – USER'S MANUAL