Art Tube MP PS Specifications

Professional Tube Microphone Preamplifer

Specifications:

Frequency Response:
Dynamic Range:
THD:
CMRR:
EIN:
Maximum Input Level:
Maximum Output Level:
Input Connections:
Output Connection:
Maximum Gain:
Input Gain Pad:
XLR Input Impedance:
Low Cut Filter:
Output Phase:
Output Limiter Type:
Phantom Power:
Signal Metering:
Tube Type:
Chassis Type:
Power Requirements:
Dimensions:
Weight:
Celebrating Twenty Years of Audio.
Applied Research & Technology • 215 Tremont St., Rochester, NY 14608 • USA • 585.436.2720 tel • 585.436.3942 fax • www.artproaudio.com
10Hz – 40KHz, +/-1 dB (typical)
>100dB (20Hz to 20KHz)
<0.05% (typical)
>60dB (typical)
<-130dB (XLR to XLR A-weighted)
+17dBu (1/4"), +16dBu (XLR)
+20dBu (1/4"), +26dBu (XLR)
1/4" TRS unbalanced (1meg Ohm),
XLR female balanced
1/4" TRS unbalanced (600 Ohm),
XLR male balanced, (<300 Ohm)
70dB (XLR - XLR), +50dB (1/4"- XLR)
Switchable, 20dB
Switchable, 4.7k Ohms / 600 Ohms
Switchable, -3dB @ 40Hz
Switchable, Normal/Invert
Switchable, Fast & Musical FET limiter,
>20dB limit range
Switchable, +48V DC, filtered, current limited
Precise LED array with a fast attack
and moderate release
12AX7A hand selected
Aluminum Anodized with integral/
stackable rubber sides
10Volts AC @ 700mA (typical)
1.75"H x 5.9"W x 6.5"D
(44.5mm x 150mm x 165mm)
2.5 lbs. (1.14 kg)
Features and specifications subject to change without notice. ©2005 Applied Research and Technology ART-TubeMPPS-Specs-0505
Features:
Extremely Low Noise
Discrete Front End
Up to 70dB of Clean,
"Musical" Gain
High Output Signal Drive
Capability
Fast FET Limiter to Prevent
Overload
Switch Selectable Input
Impedance
Precision LED Metering
Built-in Low Noise Phantom
Power Supply
Compact, Stackable all
Aluminum Chassis
XLR and 1/4" Inputs and
Outputs
Phase Invert Switch
High Cut Filter Switch
Variable Input and Output
Controls