BS-465
PSTN TELEPHONE DIALER CARD FOR BS-468 PANELS
OPERATION VOLTAGE
CONSUMPTION
INPUTS
CALL MODE
PRODUCED IN ACCORDANCE WITH
OPERATION TEMPERATURE RANGE
RELATIVE HUMIDITY
EXTERNAL DIMENSIONS
WEIGHT
GUARANTEE
GENERAL
The BS-465 (figure1) is a module that can be
fitted only on the main board of the BS-468
b u r g l a r
a l a r m
Electronics. It can send calls to selected
t e l e p h o n e n u m b e r s . T h e s e t e l e p h o n e
numbers are stored in the BS-468 panel's
memory and do not erase in the event of a
power failure but can be changed by the user
for as many times as required.
Figure 1 : View of the BS-465 circuit board .
Page 1 from 4
TECHNICAL CHARACTERISTICS
Thank you for your trust in our products.
Olympia Electronics - European manufacturer.
p a n e l
f r o m
O l y m p i a
Powered by the BS-468 panel
20mA quiescent. 50mA during a call
2 telephone line inputs PSTN (LINE, TELEPHONE)
Tone DTMF
EN 50136-1-1, EN 60950-1 , TBR-21
0 to 60 C
Up to 95%
121 x 61 x 18 mm
50gr.
2 years
INSTALLATION
The installer must install the BS-465 PSTN
module on the BS-468 panel, when the panel
is not powered by either the mains power
supply or the battery (Figure 2).
T h e B S - 4 6 5 P S T N m o d u l e h a s 2 R J 11
c o n n e c t o r s
u s e d
telephone line and a telephone handset.
T h e L I N E i n p u t i s u s e d t o c o n n e c t t h e
telephone line cable. (Figure 3)
The TELEPHONE input is used to connect
any other telephone device that we require.
Figure 2 : Installing a BS-465 on the BS-468 panel
o
f o r
c o n n e c t i n g
921465000_09_006
t h e