Riverside Furniture Joelle Aassembly Instructions

Components and Hardware List
Steps:
1. Place the Back Assembly (A) on a soft and smooth surface.
2. Attach Chair Seat (B) to the Back Assembly (A) by using Bolt (E), Spring Washer (H) and Flat
Washer (I) into the back corners of the Seat as shown in Detail 1. and Using Bolt (F), Spring
Washer (H) and Flat Washer (I) into the middle of the Seat as shown in Detail 2 . Do not fully
tighten Bolts until after next step.
Joelle
Dining Room
Assembly Instructions
Made in Viet Nam
Uph Arm Chair 2in
Be sure to check all packing material carefully
for small parts, which may have come loose
inside the carton during shipment.
Page 1 of 2
#63055