M
C
ONITOR AND
ONTROL
By default, the EMX-75XX SFP opens to the Monitor and Control view. From this view, the
user can define the DIO's mode, its ports configurations. Although the SFP does not expose the
entire functionality of the DIO, the SFP can be used to set up the EMX-75XX in most
applications.
F
Port Configuration Fields
For each Port, the following settings can be configured.
•
Data Indicators: The LED indicators in each port configuration section indicate the data
value this is being sent by or received by the indicated port. The data is an 8-bit integer with
the green LEDs indicating an output high (1) and a red LED indicating an output low (0).
•
OC: If an over-current event occurs, the OC indicator will turn red, indicating that actions
should be taken by the user.
EMX-75XX Index
P
AGE
4-5: EMX-75XX S
IGURE
OFT
Figure 4-6: Port Configuration Fields
F
P
(N
M
RONT
ANEL
ORMAL
www.vtiinstruments.com
)
ODE
51