Table of Contents
Advertisement
VTI Instruments
I
EMX-75XX S
NSPECTING THE
The EMX-7510/EMX-7511/EMX-7512/EMX-7513/EMX-7514/EMX-7515/ EMX-7519 modules
were carefully inspected both mechanically and electrically before shipment. They should be free
of marks or scratches and they should meet their published specifications upon receipt. If the
module was damaged in transit, do the following:
•
Save all packing materials
•
File a claim with the carrier
•
Call a VTI Instruments sales and service office
I
NSTALLATION
I
EMX-75XX
NSTALL
Set up the PXI Express chassis. See the Chassis' Installation Guide for assistance.
1.
2.
Make sure the PXI Express chassis is powered off.
3.
Select a PXIe slot or a hybrid slot in the PXI Express chassis for the EMX-75XX and insert it
carefully.
4.
After the EMX-75XX is inserted all the way, secure it with the screws at the top and bottom
of the EMX-75XX front panel.
S
TORAGE AND
S
I
TORING
NSTRUMENTS
Store the module in a clean, dry, and static-free environment. For other requirements, see storage
and transport restrictions in Specification.
T
I
RANSPORTING
NSTRUMENTS
Package the module using the original factory packaging or packaging identical to the factory
packaging. Containers and materials identical to those used in factory packaging are available
through VTI Instruments offices. If returning the module to VTI Instruments for service, contact a
VTI Service Center to set up an RMA. The following information will be required:
•
Serial number
•
Model number
•
Type of service required
•
Return address
•
If applicable, a description of the problem that is being encountered which provides specific
detail relating the instrument being returned.
In any correspondence, refer to the serial number and RMA number. Mark the container
"FRAGILE" to ensure careful handling. If it is necessary to package the module in a container
other than the original packaging, observe the following (although use of other packaging material
is not recommended):
1.
Wrap the module in heavy paper or anti-static plastic
2.
Protect the front panel with cardboard
3.
Use a double-wall carton made of at least 350 lbs test material
4. Cushion the module to prevent damage
10
ERIES
S
HIPMENT
EMX-75XX Index
Advertisement
Table of Contents
