Honeywell Device
OEP
IKB
Non-USB Touchscreen
3.6.1
OEP/IKB Adapter Configurations
Use the information and procedures in this section to connect the OEP/IKB adapter. The following
image illustrates the basic connections for the OEP adapter assembly.
The following image illustrates the basic connections for the OEP/IKB Adapter Connections for IKB.
Connect to this Serial Port
COM1 (configured as COM3)
COM1 (configured as COM3)
COM2 (configured as COM4)
ATTENTION
A USB port is used for a flat panel
display touchscreen.
- 29 -
Chapter 3 - Installing