DAVINCI GLIDERS DUET Manual

For tandem
Hide thumbs Also See for DUET:

Advertisement

Quick Links

DAVINCI GLIDERS / DUET
for TANDEM
REV. 4
5 August 2017
Davinci Products Inc.
53 Sinchon-gil, Okcheon-myeon, Yangpyeong-gun, Gyeonggi-do, South Korea. (12505)
Tel. +82(0)10-9799-3472 Fax. +82(0)10-9799-3472
sales@dv-gliders.com , info@dv-gliders.com
1

Advertisement

Table of Contents
loading

Summary of Contents for DAVINCI GLIDERS DUET

  • Page 1 DAVINCI GLIDERS / DUET for TANDEM REV. 4 5 August 2017 Davinci Products Inc. 53 Sinchon-gil, Okcheon-myeon, Yangpyeong-gun, Gyeonggi-do, South Korea. (12505) Tel. +82(0)10-9799-3472 Fax. +82(0)10-9799-3472 sales@dv-gliders.com , info@dv-gliders.com...
  • Page 2 This is information about the design of the DUET, advice how to use it best and how to care for it to ensure it has a long life, We hope that the DUET will give you a lot of satis- factory flying times.
  • Page 3 DAVINCI GLIDERS / DUET INDEX 1. Technical DATA 2. Materials DATA 10.4 Deep stall 10.5 Asymmetrical stall 10.6 B stall 3. Introduction and Pilot Target 10.7 Cravat 4. Risers 11. Descent Techniques 5. Lines 11.1 Big ears 6. Trimmers 11.1 Big ears 7.
  • Page 4: Technical Data

    DAVINCI GLIDERS / DUET 1. Technical DATA DUET NUMBER CELLS CLOSED AREA m² 41.1 FLAT SPAN 14.8 ASPECT RATIO AREA m² 35.2 PROJECTED SPAN 11.8 ASPECT RATIO 3.94 FLATTENING 3.49 CORD 0.13 AVER 2.78 HEIGHT 8.99 LINES MAIN 2+1/4/3/2 NUMBER A+A’/B/C/D...
  • Page 5 DAVINCI GLIDERS / DUET 2. Materials DATA CANOPY FABRIC CODE SUPPLIER UPPER SURFACE Skytex 38/32 PORCHER IND BOTTOM SURFACE Skytex 32 PORCHER IND PROFILES 32 Hard MYUNGJIN TEX DIAGONALS 32 Hard MYUNGJIN TEX SUSPENSION LINES FABRIC CODE SUPPLIER UPPER CASCADES...
  • Page 6 The setup shown on the below picture. excess of 200kg 4. Risers DUET has 4 risers. The A riser has a red cover to easy identification. There is another line with red mailon. There is A’ and is for the big ears.
  • Page 7: Pre-Flight Check

    6. Trimmers The DUET is supplied with a trim riser set. The ‘neutral’ or standard position is when the trimmers are pulled all the way down and A/B/C/D riser lengths are equal. We recommend performing landing and take-off with the trimmers closed. With the trimmers closed, the DUET will reliably inflate without any overshooting.
  • Page 8: In Flight Characteristics

    To familiarize yourself with the DUET your first turns should be gradual and progressive. To make efficient and coordinated turns with the DUET first look in the direction you want to go and check that the airspace is clear. Your first input for directional change should be weight- shift, followed by the smooth application of the brake until the desired bank angle is achieved.
  • Page 9 DAVINCI GLIDERS / DUET 10. Deflations In spite of the DUET has great stability of the flight, strong turbulence or piloting error may cause a portion of the wing suddenly to be a deflation. 10.1 Asymmetric collapse Asymmetric collapse usually happens when the pilot has not foreseen this possible reaction of the wing.
  • Page 10 10.6 B stall We do not recommend a B stall with the DUET. This techniques is generally very hard to use with DUET by the high force needed to pull down the B lines. 10.7 Cravat In case a cravat should occur from an asymmetric collapse or other manoeuvres, it is important to keep your flying direction by applying some brake on the opposite side and weight shift.
  • Page 11: Descent Techniques

    The sink rate could be more than 15 m/sec. To get out of the spiral dive you must release the inner brake and use the outside brake to manage your sink rate. Mind that DUET may take one more turn after releasing the brake.
  • Page 12: Maintenance And Cleaning

    The DUET need be folded cell to cell to keep the plastic reinforcement at the leading edge lie flat on each other and don’t get bent. Try to pack your DUET as loosely as the packing bag allows, because every fold weakens the fabric.
  • Page 13 Do not leave marked tracks and do not leave rubbish behind. Do not make unnecessary noise and respect sensitive biological areas. The materials used on a paraglider should be recycled. Please send old Davinci gliders back to us Davinci Gliders offices. We will undertake to recycle the glider.
  • Page 14 DAVINCI GLIDERS / DUET Checked line sheet(with riser) The measured values at the lower surface of the tailing edge, cll depth and spacing of the articulation points were determined under tensile load of 50N. Brake 9016 8929 8969 9120 9185...
  • Page 15 DAVINCI GLIDERS / DUET Name Manufacturer Name Manufacturer Name Manufacturer Name Manufacturer Name Manufacturer Name Manufacturer PPSL 160 PPSL 160 PPSL 160 PPSL 120 PPSL 120 DSL70 PPSL 160 PPSL 160 PPSL 160 PPSL 120 PPSL 120 DSL70 PPSL 160...
  • Page 16 DAVINCI GLIDERS / DUET Serial Number Date of Production Dealer Date of sales Check and repair information...

Table of Contents