Assembling And Connecting The Appliance; Requirements For The Installation Site - Parkside PWT 11 A1 Operating Instructions Manual

Assembling and connecting the appliance

Screw the extension tube t clockwise onto the ground spike u.
♦
Screw the main unit 8 clockwise onto the extension tube t.
♦
Screw the connecting piece 6 clockwise onto the main unit 8.
♦
Screw the sprinkler unit 3 clockwise onto the connecting piece 6.
♦
Use a quick coupler or adapter to connect a suitable garden hose
♦
to the 13 mm (
NOTE
If you unscrew the water stop i you will have the option to
►
connect another appliance to the 26.44 mm (
Keep the water tap closed until all the settings have been
►
completed.

Requirements for the installation site

The installation location must meet the following requirements to
ensure safe and error-free operation of the appliance:
Ensure that no uninvolved persons are affected by the appliance.
■
Ensure that the safety and limiting devices are not rendered unusable.
■
The ambient temperature must be between +5°C and +30°C.
■
Use only clear fresh water.
■
The motion sensor 9 reacts more effectively when animals to be
■
driven away walk past the appliance instead of walking directly
towards the unit.
The field of view of the motion sensor 9 must not be obscured.
■
The surface of the motion sensor 9 must be kept clean.
■
The appliance must be stable and secure; otherwise, the recoil of
■
the water jet may knock the appliance over.
│ GB │ IE
■ 8
) garden hose connection z.
) connection.
PWT 11 A1