Advertisement
Quick Links
Advertisement
Related Manuals for Thor’s Drone World Lifthor Mjolnir
Summary of Contents for Thor’s Drone World Lifthor Mjolnir
- Page 1 by Thor’s Drone World User’s Manual...
- Page 2 Congratulations on your new the Ultimate Tablet holder for DJI Mavic Series...
- Page 3 Content: Aluminum body Tablet clamp Compatible with 7.9” up to 13” devices Aluminum ball joint Support plate Hex Key (x2)
- Page 4 How to assemble: Remove the components from the box, use the bigger hex key provided to unscrew the ball joint Using the bigger Hex key provided, secure the ball joint on the top hole of the aluminum body, make sure it is tightened hard.
- Page 5 With the smaller hex key provided, untighten the aluminum stopper from the underside of the body.
- Page 6 Slide the stopper all the way to the back to allow space for the RC to enter. Stopper *Note: The body has 2 anti-slip pads to protect the RC from any scratches and keep it secure in place.
- Page 7 Prepare the RC by raising the antennas and extracting the arms all the way out...
- Page 8 Gently lower the RC into the bay of the base with a slight inclination. You might feel some resistance while sliding the controller in place, due to the anti-slip pads.
- Page 9 Secure the RC in place by sliding the stopper towards the RC. Make sure the RC is center and align properly...
- Page 10 Once everything is in place, secure the stopper from underneath the body, with the small Hex Key provided.
- Page 11 Unscrew the tightening ring from the back of the Tablet Clamp and place it on the ball joint tightening ring ...
- Page 12 tightening ring Attach the clamp to the ball joint and screw the ring back to secure the clamp position / angle.
- Page 13 The clamp has two mechanisms to ensure your tablet sit secure Ratchet part and in place. to adjust the height The first mechanism is the ratchet part, to adjust to the size of your Lock tablet. We recommend setting it a little smaller (1”...
- Page 14 Place the tablet in landscape mode by pulling the spring mechanism upwards and release it to secure the tablet in place. You can adjust the top clamp brackets, if needed, to avoid pressing on any buttons Spring mechanism *Scan the QR code with your phone for a video tutorial...
- Page 15 Compatible with most small tablets like iPad Mini or similar up to larger tablets like the iPad Pro 12.9” and everything in between...
- Page 16 Alternative setups: With your With the smart phone support plate provided With the With the RC’s arms RC’s arms opened closed...
- Page 17 Integrated tripod mounting point located underneath the main body...
- Page 18 Separately sold accessories: Exchangeable phone clamp Mounting bracket for 4Hawks antenna Mounting bracket for CrystalSky Monitor...
- Page 19 www.lifthor.com...
Need help?
Do you have a question about the Lifthor Mjolnir and is the answer not in the manual?
Questions and answers