Music On Hold; Telephone Paging Input; Remote Control Battery - Russound MIXAMP-60 Manual

Remote Control Commands for the USB/SD Player
• Power – Toggles the front panel media player On/Off
• Mute - Toggles the volume mute On/Off. The current
mute state will be visible in the top left of the built-in
display.
• Play/Pause – Toggles between Play/Pause
• EQ - Toggles among the preset EQ settings: Normal,
Rock, Pop, Classical, Jazz, Country. The current
setting appears at the top of the display
• Prev – Restarts the current track. Pressing this
repeatedly will cycle through previously played tracks.
Pressing and holding this button will fast forward the
audio within the currently playing track.
• Next – Skips to the next track. Pressing this repeatedly
will cycle through upcoming tracks. Pressing and
holding this button will rewind the audio within the
currently playing track.
• Repeat – Toggles the track repeat function through
various positions – repeat all, repeat track, random
(shuffle)
• U/SD – Toggles between USB and microSD cards
when both are present in the media player
• Numeric Buttons – Entering a number will directly
select a track by number. No enter key is necessary.
To select track 17, enter 17 and wait and track 17 will
start to play. If random (shuffle) is enabled, numeric
entry will select random tracks.
MixAmp-60 | 70V Mixer Amplifier with Media Player
8

Music on Hold

This output will feed music on your telephone system or PBX
for people waiting to be answered. A dedicated input should
be available on your telephone system. Please refer to a
qualified technician if you can't identify this input.

Telephone Paging Input

This special TEL input will allow you to page in your PA
system using your own telephone set or PBX system. At
the end of the announcement, the system will return to its
normal operation.

Remote Control Battery

The Remote Control uses a CR2025 button-cell battery. See
the illustration below for the steps to remove the battery
holder.
1 2