Table of Contents
Related Manuals for NuEyes Mira Cast
Summary of Contents for NuEyes Mira Cast
- Page 1 NuEyes Mira Cast Solution *** Please note you must have a smart TV as well as an internet/Wi-Fi connection. *** Your Smart TV must be connected to the same Wi-Fi network as your NuEyes Glasses. 1. Hold down menu button for 30+ Seconds until the admin...
- Page 2 2. Scroll down using your finger controller/Bluetooth Remote to the tab that says “Wi-Fi”; Then click or depress controller to enter Wi-Fi mode. 3. Select Appropriate Wi-Fi connection...
- Page 3 4. Use on board key board to log in. 5. Press back button once (no hold) to Re-enter admin mode...
- Page 4 6. Scroll down using your finger controller/Bluetooth Remote to the tab that says “display”; Then click or depress controller to enter display mode. 7. While in display mode scroll down to cast screen and depress or click on cast screen.
- Page 5 8. When in Cast screen mode press menu button and enable wireless display. 9. Once Enabled you will see your Smart TV connect to the NuEyes Glasses.
- Page 6 NuEyes software. ***Please note the following*** Mira Cast clarity depends on how fast your Wi-Fi signal is and how close the glasses are to the television. Fast movements of the glasses will distort the Mira...
Need help?
Do you have a question about the Mira Cast and is the answer not in the manual?
Questions and answers