Ghent Prest Mobile Instruction Sheet

Prest Mobile Whiteboard

Instruction Sheet

Step 1: Remove and unpack the legs, casters, braces, and hardware kit from the packaging, leaving the

whiteboard intact inside the box.

(1)

Whiteboard

Step 2: Install the casters on the legs.

3a. Use the cardboard as a protective work area as you place the whiteboard on its side

3b. Align the legs with the pre-drilled holes on the frame.

3c. Use the screws with washers to attach the legs to the frame, hand tighten with provided allen

wrench.

www.ghent.com/install - Lebanon, OH 800-543-0550

Brace

(2)

(4)

Leg

Caster

(4)

(6)

1/4-20 x 7/8"

(1)

Accessory Holder

(12)

WASHER

(6)

1/4-20 x 2"

ALLEN WRENCH

1/4"-20 X 2" SCREWS WITH WASHERS

IS-PREST (12/19)

(PAGE 1 OF 2)

(1)

Table of Contents

Do you have a question about the Prest Mobile and is the answer not in the manual?

Page 1 3b. Align the legs with the pre-drilled holes on the frame. 3c. Use the screws with washers to attach the legs to the frame, hand tighten with provided allen wrench. 1/4"-20 X 2" SCREWS WITH WASHERS www.ghent.com/install - Lebanon, OH 800-543-0550 IS-PREST (12/19) (PAGE 1 OF 2)
Page 2 Step 5: Repeat steps 3 and 4 for the opposite side. Step 6: Stand the unit upright and attach the accessory holder using the provided magnets. Step 7: Recycle all packaging materials in accordance to local regulations. www.ghent.com/install - Lebanon, OH 800-543-0550 IS-PREST(12/19) (PAGE 2 OF 2)