Connectors (For Indoor Only) - Vivotek 2M User Manual

1.4

Connectors (for Indoor Only)

The diagram below shows the IP Camera's default button and various
connectors. Definition for each connector will be given as follows.
No.
1
2
3
4
5
6
Connector
RJ-45
AC 24V
Power
DC 12V
BNC
Alarm & Audio I/O
microSD Card Slot
Default Button
NOTE: Please insert the SD card into the microSD Card Slot before
power on the camera. If the camera is already powered on, reboot the
camera after the SD card is inserted.
Pin Definition
- 10/100 Mbps Ethernet / PoE
1 AC 24_1
2 AC 24_2
3 GND
4 DC 12V (+)
- For analog Video Output
1 Alarm In (–)
2 Alarm In (+)
3 Alarm Out (–)
4 Alarm Out (+)
5 Audio Out (R)
6 Audio Out (L)
7 Audio GND
8 Audio In (R)
9 Audio In (L)
- For video recording storage
Press the button with one finger to restore the
-
system.
Remarks
Power connection
Alarm connection
Line Out
Line In
7