Vivotek 2M User Manual page 13

Additionally, users can change the network property of the IP Camera to DHCP
or Static IP directly in the device finding list. Refer to the following section for
changing the IP Camera's network property.
Example of Changing IP Camera's Network Property
Step 1: In the finding device list, click on the IP Camera that is wished to
Step 2: The Network Setup page will come out. Select <DHCP>, and click
Step 3: Click on <OK> on the note of setting change. Wait for one minute to
Step 4: Click on the <Device Search> button to re-search all the devices.
Step 5: Enter User name and Password to access the IP Camera.
Installing DC Viewer Software Online
For the initial access to the IP Camera, a client program, DC Viewer, will be
automatically installed to the PC when connecting to the IP Camera.
If the Web browser doesn't allow DC Viewer installation, please check the
Internet security settings or ActiveX controls and plug-ins settings (refer to
chapter
The Information Bar (just below the URL bar) may come out and ask for
permission to install the ActiveX Control for displaying video in browser.
Right click on the Information Bar and select <Install ActiveX Control...> to allow
the installation.
12
change its network property. On the selected item, right click and
select <Network Setup>. Meanwhile, record the MAC address of the
IP Camera, for future identification.
<Apply> button down the page.
re-search the IP Camera.
Then select the IP Camera with the correct MAC address.
Double click on the IP Camera, and the login window will come out.
Appendix C: Setup Internet Security) to continue the process.