– ISO 3864-2:2004 Graphical symbols - Safety colours and safety signs - Part 2: Design principles for product safety labels FPM “DELJANIN” declares that the products named above have been designed to comply with the essential health and safety requrements relating to the design and construction of machinery of Annex I Machine Directive 2006/42EC and referenced harmonized standards.
2.1 The instructions purpose The purpose of this guide is to enable the proper implementation of the machine, successful operation and maintenance work. A careful study of this manual will provide you with useful information for the preparation of the equipment, as well as for the work with it. The great variety of working conditions in practice does not allow it to be covered by these guidelines, but all essential elements of the machine settings are clearly set out.
Maximum speed and direction of rotation of the tractor shaft (540 rev/min) Turn off the engine and remove the key before you start with the maintenance and servicing The warning label that alerts you to the regular obligatory bolt control. ―DELJANIN‖...
3.2 TECHNICAL DATA Type ......FPM „DELJANIN‖ Length ......1,5 m Width ......2.2 m Height ......0,9 m Spring tines number ......33; 36; 39 on fork Working width ......2,0m Effeciency ......up to 2 ha/h Speed during ......
Picture 1 1. Bolt 2. Three-point mechanism 3. Support wheel 4. Drive belt 5. Drive spindle 6. Belt of the raking system 7. Height adjusting device - right 8. Height adjusting device - left 9. Driven spindle 10. Curtain 11. Stretching screw of the driving belt 12.
4.1 INSTRUCTIONS FOR WORK Connecting to the tractor o Connect the rake to the tractor. o Connect the P.T.O. Shaft and fix the protections. o Adjust the height by height adjusting device. o Once you have connected the rake to the tractor for the first time, switch it on and make sure it works properly.
The belt rake is easy to maintain. In order to prolong its life period we recommend that you take into consideration the following: 5.1 Stretching and maintenance of the belts V-belts should be properly stretched. Check the tension of the belts after first few hours of operating.
―DELJANIN‖ machines. Original spare parts guarantee the smooth operation of the machine. Possible usage of other parts reduces the quality of operation, exploitation and safety of the machine. Use only FPM “DELJANIN” spare parts!
All devices are tested for technical and safety reasons at every stage of the manufacturing process. Nonetheless, there may be a malfunction of the device. That's why you should read the warranty terms: 1. We declare that during the warranty period, the product will operate flawlessly, if you use it in accordance with its purpose and the enclosed instructions.
PRODUCT NAME: PRODUCT TYPE SERIAL NUMBER: TSP “TRAKASTI” BELT RAKE Controler’s YEAR OF signature: MANUFACTURING DATE OF DELIVERY MONTH (IN WORDS): YEAR: _______________ ________________________ _______________ BUYER DATA: BUYER’S NAME: ________________________________________________ PLACE: ________________________________________________ ADDRESS: ________________________________________________ stamp SALESMAN: ....................
Need help?
Do you have a question about the TRAKASTI and is the answer not in the manual?
Questions and answers