Troubleshooting - Nevir NVR-4402 NSD Owner's Manual

TROUBLESHOOTING

If your device shows the other symptoms that those described above, please call the service after
sale of the shop a retailer.
Symptom
The appliance
does not work.
The appliance
makes a lot of
noise
The appliance
doesn't cool
enough
The appliance
doesn't cool
enough
The following symptoms are not breakdowns:
 The noise of the cooling liquid which circulates in pipes can be heard, it is normal.
 The humidity on the surface outside of the device during the wet seasons is not a problem of the
device; you just need to wipe it with a dry s cloth.
 The compressor and the condenser can warm more during the periods of strong heat.
 The frame of the door is a bit hot; it means that the condenser works to evacuate the
Cause
There is no power supply
The fuse doesn't work
The appliance is too close to the
wall, or is not stable, or the
accessories inside the refrigerator
are placed in wrong
position
The door is too often opened or
was left opened for a long time
The refrigerator is too close to the
wall
The refrigerator is too full
The temperature is badly, adjusted
The refrigerator is too close to the
wall
The refrigerator is too close to the
wall
Solution
Check the plug connect it others
appliance, or verify that the appliance
is connected to the plug
Replace the fuse
Stabilize the base of the refrigerator by
adjusting the position of feet, take away
the device of the wall, place correctly
the accessories inside the refrigerator
position
Close the door and do not open it too
much frequently
Take away the device of the wall to favor
the ventilation
Remove food of the device
Turn the knurl of regulation of
temperature on "3" or more
Throw away obsolete food and
wrap the other
Clean the inside of the refrigerator
-17-