Introduction - glass 1989 NOOR STEAM MODULE Installation, Operation & Maintenance Manual

INTRODUCTION

of the product.
to the end-user if the installation, use, and maintenance are
on condition that electrical and mechanical parts are maintained
For this reason the instructions provided in this manual must be
The product is built to conform to standard low -voltage
directives 2006/95/EEC.
The shower panel's protection class is IPX4 and the rated voltage
is 230V; max 2800 W for the steam bath version.
on the product:
EN 55014-1
EN 55014-2
SYMBOLS USED
IN THIS MANUAL
and on certain parts of the product itself.
CONVENTIONAL SYMBOLS AND THEIR MEANING.
WARNING
DANGER OF ELECTROCUTION.
Warn user that, if the described operation is not performed
WARNING:
GENERAL DANGER.
Warn user that, if the described operation is not performed
WARNING: HOT SURFACE.
Do not touch the steam dispenser during the steam bath! Hot
surface, drops of water can form.
NOTE.
Inform the personnel involved - information that, if not observed,
WARNINGS.
Inform the personnel involved -important information.
HYDRAULIC INSTALLER.
ENGLISH
ELECTRICAL INSTALLER.
normal conditions, is responsible for all electrical work, such as
setting, maintenance and repairs. The technician is capable of
working in energized control cabinets or on electrical sockets.
WARNING
OPTIONAL
CONSUMPTION MATERIAL
labels.
etc.) inside the bathroom where the appliance is to be installed
must be in compliance with current regulations -.
inside or next to the shower panel during use.
which can reach high temperatures, close to 100° C.
WARNING.
Do not use acetic silicone.
that the silicone is not acetic.
herein are not complied with.
personnel.
9
SAFETY REGULATIONS