Selmo Infinity PLUS Manual

Selmo Infinity PLUS Manual

Electronic control for electric radiators

Advertisement

Quick Links

Selmo
Electronic control for electric radiators
Infinity is a digital electronic programmable thermostat with daily programming
and weekly repetition for electric radiators with fluid or dry heat transfer.
Temperature is regulated by a triac with PID algorythm, through enviormental
probe . It can be assembled with different heating elements, with a max power of
2000W
Equipped with a backlit display among the largest in the category, allows you to
optimize each state and mode of use .
It is equipped with an IR receiver that allows it to interface with the Selmo remote
control
Infinity is a certified product:
Infinity is according to direcrives
-Eco-design Directive for Energy-
-Eco-design Directive for Energy-
using Products, 2005/32/EC (<0,5W).
using Products, 2005/32/EC (<0,5W).
-EN 60335-1:2012+A11:2014
-EN 60335-2-30:2009+A11:2012
-EN 61000-3-2:2014
-EN61000-3-3:2013
-EN 62233:2008
-EN 55014-1:2006+A1:2009+A2:2011
-EN 55014-2:1997+A1:2001+A2:2008
Electronic
Electronic
Selmo
Selmo
Via Pacinotti, 24 - 35030 Rubano
Via Pacinotti, 24 - 35030 Rubano
"Infinity PLUS"
(PD) Italy- Tel 049.8976761, Fax 049.8976085 -
Comfort technology division
Rev.02 - June 2018
www.selmo.it
www.selmo.it
EN

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Infinity PLUS and is the answer not in the manual?

Questions and answers

Summary of Contents for Selmo Infinity PLUS

  • Page 1 Equipped with a backlit display among the largest in the category, allows you to optimize each state and mode of use . It is equipped with an IR receiver that allows it to interface with the Selmo remote control Infinity is a certified product:...
  • Page 2: Technical Features

    Selmo Comfort technology division “Infinity PLUS” Electronic control for electric radiators Technical features Product Electronic control for electrical radiators Applications Electrical radiators Insulating class CLASS II IP Class IP22 Plastic color White Alimentation cable color White Temperature Selection Digital (triac regulation)
  • Page 3: Security Warnings

    Selmo Comfort technology division “Infinity PLUS” Electronic control for electric radiators Security warnings (Exclusive installator use) If the power cable is damaged, it must be replaced by the manufacturer or service center. Attention electrical shock warning! Always make sure that the power supply is disconnected before installing the...
  • Page 4: Installation Instructions

    Selmo Comfort technology division “Infinity PLUS” Electronic control for electric radiators Installation instructions at exclusive use of installer ATTENTION: ATTENTION: Disconnect the power supply before installation. Disconnect the power supply before installation. The installation must be performed by authorized operators.
  • Page 5: Installation Procedure

    Selmo Comfort technology division “Infinity PLUS” Electronic control for electric radiators Installation Procedure 1) - Remove the plastic side cover. - Pass the 2 cables of the heating element through the thermostat hole (see photo). - Remove the cables from the thermostat.
  • Page 6 Selmo Comfort technology division “Infinity PLUS” Electronic control for electric radiators Fil-Pilote System connection (Only for Fil-Pilote versions) Soggiorno Bagno Camera1 Camera2 Living Room Bathroom Bedroom1 Bedroom2 Esempio Class II Class II Class II Class I EXAMPLE Termostat Termostat Termostat Termostat "Fil-Pilote"...
  • Page 7: Lcd Display Icons

    Selmo Comfort technology division “Infinity PLUS” Electronic control for electric radiators LCD DISPLAY ICONS Mode Mode -Stand-By; -Crono; -Antifreeze; -Night; -Comfort; ECO function -Fil-Pilote. and starting adaptive power keys lock icon open window Crono mode relevation selected program icon Setted hour...
  • Page 8 Selmo Comfort technology division “Infinity PLUS” Electronic control for electric radiators 2. “COMFORT” “NIGHT” MODES Two different levels of temperature can be set: -"COMFORT" temperature: It is the temperature used for "Chrono", " Fill pilot" and "Comfort" modes. -"NIGHT" temperature: It is the temperature used for the "Night" and "Chrono" modes.
  • Page 9 Selmo Comfort technology division “Infinity PLUS” Electronic control for electric radiators Night mode By selecting this mode, the unit will keep the room at the set night temperature. The desired night temperature setting is as follows: 1.Press the [mode] button until the corresponding icon appears on the display. 2.Select the night level temperature using the buttons.
  • Page 10 Selmo Comfort technology division “Infinity PLUS” Electronic control for electric radiators TIMER-2H MODE he "Timer 2h" mode can be used to quickly warm up the room or to speed up Press the [ mode ] button until the display shows the "2h" .
  • Page 11 Selmo Comfort technology division “Infinity PLUS” Electronic control for electric radiators c) Activation Functions "Open window detection" "ASC" The user can activate or deactivate these functions as follows: 1. Activate the stand-by status. 2.Press the [chrono] key for more than 5 seconds.

Table of Contents