Download Print this page
Selmo SMART PLUS PROGRAM Manual

Selmo SMART PLUS PROGRAM Manual

Electronic control for towel heaters

Advertisement

Quick Links

Selmo
"SMART Plus Program "
Electronic control for towel heaters
SMART PLUS PROGRAM is an electronic clock
thermostat for electric towel heaters based on fluid heat
transfer.SMART PLUS PROGRAM controls the room
temperature by means of an external sensor.
The
SMART
series has the heating element attached to
the thermostat.
The symmetry of the device enables both right and left
side coupling to the towel heater. The device is supplied
with a dedicated remote control that can be used for
defining a weekly program configurable for each day of
the week. The remote control is provided with a bracket
for anchoring it to a wall or to the towel heater
SMART Program is a certified product:
SMART Program is compliant to the following standards:
-
-
Eco-design Directive for Energy-using Products, 2005/32/EC
Eco-design Directive for Energy-using Products, 2005/32/EC
-EN 60335-1:2012+A11:2014 -EN 60335-2-30:2009+A11:2012
-EN 60335-2-43:2003+A1:2006+A2:2008
-EN 61000-3-2:2014 -EN61000-3-3:2013 -EN 62233:2008
-EN 55014-1:2006+A1:2009+A2:2011 -EN 55014-2:1997+A1:2001+A2:2008
Electronic
Electronic
Selmo
Selmo
Via Pacinotti, 24 - 35030 Rubano
Via Pacinotti, 24 - 35030 Rubano
Comfort technology division
Twelve different types
of electric resistance
are available, from
100W to 1000W. The
device is available in
white and chromed
colours, and it can even be mounted on towel heaters with
mixed operation.
Operative modes:
Comfort, Night, Antifreeze, Chrono, Boost 2h, ECO
Open window detection, Fil-Pilote, Key lock.
Available colours:
- White
- Chromed
Page 1
(PD) Italy- Tel 049.8976761, Fax 049.8976085 -
(PD) Italy- Tel 049.8976761, Fax 049.8976085 -
(<0,5W).
(<0,5W).
Release 02 - June 2018
www.selmo.it
www.selmo.it
,ASC
,
ENG

Advertisement

loading
Need help?

Need help?

Do you have a question about the SMART PLUS PROGRAM and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Selmo SMART PLUS PROGRAM

  • Page 1 Comfort technology division “SMART Plus Program ” Electronic control for towel heaters SMART PLUS PROGRAM is an electronic clock thermostat for electric towel heaters based on fluid heat transfer.SMART PLUS PROGRAM controls the room temperature by means of an external sensor.
  • Page 2 Selmo Comfort technology division “SMART Plus Program ” Electronic control for towel heaters Product Electronic control for electric towel radiators Applications Towel radiators Insulation class Class I, Class II IP level IP44 Maximum power See table below Supply voltage 230VAC 50Hz...
  • Page 3 Selmo Comfort technology division “SMART Plus Program ” Electronic control for towel heaters Product Remote control for electronic control Applications Smart Plus Program thermostat Colour White Display Keyboard 7 keys Temperature selection Digital Operational mode Digital selection Selectable operational Comfort, Night, Antifreeze, Stand-by, Chrono, Boost...
  • Page 4 Selmo Comfort technology division “SMART Plus Program ” Electronic control for towel heaters WARNING RISK OF ELECTRIC SHOCK! Disconnect power supply before proceeding with installation. Preserve with care the present instruction sheet and read carefully before using the • device.
  • Page 5 Selmo Comfort technology division “SMART Plus Program ” Electronic control for towel heaters Installation guide For authorized installer only •Disconnect the device from power supply before proceeding with installation. •Disconnect the device from power supply before proceeding with installation. •Protect the device with a 30mA RCD circuit breaker •Protect the device with a 30mA RCD circuit breaker...
  • Page 6 Stazione "Fil-Pilote" 1.Smart Plus Program with “Fil-Pilote” function (Class II) can be remotely controlled by a remote control unit supporting the “Fil-Pilote” standard. The brown wire is the Live wire (L), the grey wire is the Neutral wire (N) and the black wire is used for receiving the Fil- Pilote signal.
  • Page 7: Remote Control Characteristics

    Selmo Comfort technology division “SMART Plus Program ” Electronic control for towel heaters Anchoring the remote control to the wall Screw anchors for fixing the Bracket for anchoring bracket to the wall. to the wall. Screws. Anchoring pins. Hooks for...
  • Page 8 Selmo Comfort technology division “SMART Plus Program ” Electronic control for towel heaters User Manual "On/Stand-by" LED: (red/green/amber) it indicates the status of IR receiver the thermostat. Heating element. 1/2" GAS thread for fastening to the radiator. Sonda NTC On/Stand-by button Power cord "Mode"...
  • Page 9 Selmo Comfort technology division “SMART Plus Program ” Electronic control for towel heaters Display Display button Pulsante [ECO] button [ECO] Pulsnte [ + ] [ + ] button Pulsante [chrono] [crono] button Pulsante [Mode] button [Mode] [Boost 2h] [On/Stand-by] button...
  • Page 10 Selmo Comfort technology division “SMART Plus Program ” Electronic control for towel heaters User guide User guide Press the [On/Stand-by] button on the remote control or on the thermostat to turn on the device or to switch to "Stand-by" mode NOTES:- When the device goes into “Stand-by”...
  • Page 11 Selmo Comfort technology division “SMART Plus Program ” Electronic control for towel heaters Comfort Mode The "Comfort" temperature corresponds to the desired temperature for the room. -Press the [Mode] key until the "Comfort" icon is displayed. -Set the desired temperature using the keys.
  • Page 12 Selmo Comfort technology division “SMART Plus Program ” Electronic control for towel heaters Chrono Mode This operating mode allows the definition of a weekly program configurable for each day of the week.To enter into this mode, press the [Mode] key until the display shows the "Chrono"...
  • Page 13 Selmo Comfort technology division “SMART Plus Program ” Electronic control for towel heaters Fil-Pilote Mode (only for models equipped with "Fil-Pilote" feature) In this mode the device is managed by a remote control unit. 1.Press the [Mode] key until the corresponding icon is shown on the display.
  • Page 14 Selmo Comfort technology division “SMART Plus Program ” Electronic control for towel heaters Summary table of the "On/Stand-by" LED statuses Green The device is in stand-by mode The device is active Amber The device is in “Chrono” mode Summary table of the "Mode" LED statuses - "Comfort":...